How to use uLaunchELF
A User Guide for the Noobie
This screen is where you can configure certain things for uLE to use at each startup.
Take note of the Key Legend at the bottom of the screen, as it may change depending on what you select in the menu.

StartUp Settings Screen:


STARTUP SETTINGS
Reset IOP: ON
Number of CNF's: 1
Pad mapping: 0:OK X:CANCEL
USBD IRX: DEFAULT
Initial Delay: 0
'Default' Timeout: 10
USB Keyboard Used: ON
USB Keyboard IRX: DEFAULT
USB Keyboard Map: DEFAULT
CNF Path override: NONE
USB Mass IRX: DEFAULT
Language File: DEFAULT
Font File: DEFAULT
ESR elf: DEFAULT

RETURN
0:Change  /\:Return


Reset IOP:  uLE by default resets the IOP, but you can turn off this if you need to run uLE without it resetting the IOP
Number of CNF's:  Here you can specify how many CNF file uLE will use, if you have made multiple configuration files.
Pad mapping:  Choose if you want  X:OK/O:Cancel or O:OK/X:Cancel buttons. The default uses standard Japanese format.
USBD IRX:  You can use an external file if you should find you need one to access a USB device  and uLE will use it instead of its default one.
Initial Delay:  You can set the delay for a longer time if your booting uLE from another app that  uses the same button you assigned an app to use in uLE.
'Default' Timeout:  If you have assigned an app to auto-load as Default, then you can set the time it takes before uLE will boot the app in seconds, default is 10
USB Keyboard Used:  You can just leave this as is, unless you have issues with your keyboard.
USB Keyboard IRX:  You can just leave this as is, unless you have issues with your keyboard.
USB Keyboard Map:  You can just leave this as is, unless you have issues with your keyboard.
CNF Path override:  Here you can specify a location path for uLE to use a LAUNCHELF.CNF file  in a specific location uLE doesnt normally search for.
USB Mass IRX:  If your USB storage device needs a specific IRX driver, you can specify its location for uLE to use it instead of its default one.
Language File:  You can use another language with uLE by specifying the location of the language.lng file by browsing your connected devices
Font File:  You can use a different font if you wish , just browse the location of the font.fnt file and uLE will use it.
ESR elf:  If you wish uLE to use a specific ESR.ELF from a location other than its default one, you can browse for the file from here and uLE will use it

RETURN returns you to the  Configure screen (up a level)
Further information can be found  in the uLE Wiki or at the Official uLaunchELF forums.
Return to Main Page